When it’s time to replace your drill bits, you want to be sure you are getting the right one for the job. There are several different types of drill bits, each designed for a specific purpose. This article will explain the different types of drill bits so you can find the ones that are right for your projects.
Change a drill bit with a keyless chuck
If your drill has a keyless chuck, you can change the drill bit without using a key. To do this, first, make sure the drill is turned off and unplugged. Then, use your fingers to twist the drill bit in the chuck until it loosens. Once it’s loose, you can pull the drill bit out and replace it with a new one. To tighten the new drill bit, simply twist it in the chuck until it’s snug.
To sum it up:
- Unplug your drill and remove the battery.
- Loosen the chuck by turning it counterclockwise.
- Insert the new drill bit into the chuck.
- Tighten the chuck by turning it clockwise.
- Replace the battery and plug in your drill.
Change a drill bit with a keyed chuck
Over time, drill bits can become worn down, making them less effective at drilling through materials. When this happens, it’s time to change them out for new ones.
Changing a drill bit with a keyed chuck is a relatively simple process, and only requires a few steps. First, you’ll need to remove the old drill bit from the chuck. To do this, simply unscrew it counterclockwise until it comes free. Next, take your new drill bit and insert it into the chuck, screwing it in clockwise until it’s tight.
To sum it up:
- Insert the drill bit into the chuck.
- Use the key to tighten the chuck until the bit is secured.
- Unplug the drill.
- Remove the chuck key.
- Plug the drill back in and test the bit.
Conclusion
In conclusion, make the tools you use to do your job the best they can be. This basic tip for having the right tools for the job applies to all trades, from plumbing to auto repair. When you’re not in a hurry, change out your bits for new ones.
Related article
- Read about the best cordless drills below 50 dollars.